Bus ducts are widely used in large-scale power supply construction nowadays,and it is difficult to operate normally without bus ducts in many power supply systems.Bus ducts are used in large power supply equipment to handle situations of insufficient power supply,especially during the production days of some large factories,where the use of bus ducts is necessary.When detecting insulation strength,one of the detection heads is fixed on the conductive sheet,and the other detection head moves in sequence from the second conductive sheet to each conductive sheet.

　　The insulation strength between the conductive pieces inside the bus duct is tested pairwise.When the central air conditioner moves to each piece of the same electrical piece,the insulation strength detector will detect the insulation strength between the two pieces of the same electrical piece detected by the two detection heads.Detecting the resistance of the conductive piece is much simpler than detecting the insulation strength.As long as the two detection heads are controlled to move to both ends of the same conductive piece at the same time,the micro ohmmeter can measure the resistance of this conductive piece.The measured resistance and insulation strength of the conductive piece are automatically transmitted to the upper computer.

　　For bus ducts used in different fields,our product specifications and other requirements naturally vary,so that we can better purchase according to our actual needs.If there are high requirements for corrosion resistance in certain application fields,then we naturally need to consider these performance parameters;For some fields with special usage requirements under high temperature conditions,we can choose bus ducts with emphasis on high temperature resistance technology,which is more suitable for our practical applications.

　　When using bus ducts,their current capacity is large and their load-bearing capacity is also very flexible,whether it is small or large current.When selecting bus ducts,the voltage drop requirement for dense bus ducts is very small.When using bus ducts in a circuit,if there is a short circuit,its short-circuit load capacity is also strong.In the process of choosing to use it,because of its high safety performance and long service life,you can use it with confidence.Bus ducts are widely used in many factories,buildings,and other places where electricity is needed.